Adhesive Wakol D3540 0,8kg

For the installation of both cork wall tiles and cork parquet, we recommend high-performance, very ecological Wakol D3540 glue.

It is a very low-emission, solvent-free, water-based latex-acrylic dispersion, intended for sticking cork cladding on absorbent and non-absorbent substrates as well as utility floors.

It is characterized by easy application, high initial adhesion, for use on underfloor heating and under furniture on wheels, and the possibility of using the floor immediately after gluing it.

Apply the glue on both glued surfaces, on the cork cladding and the substrate, using a short-haired velor roller and let it evaporate completely (the glue will become transparent) - minimum 30 minutes.

It should not be used if the room temperature is below 15ºC.

The consumption of glue is approx. 250 g / m², although it is usually lower.

Detailed information is included in the product card.